What are automatic measure liquor pourers?
It is a spout that fits on most standard liquor bottles. It works as a serve and stopper. Reduces wastage of liquor, something that happens in absence of a pourer.
Types of automatic measure liquor pourers
There are two types of liquor pourers - Standard liquor pourers and Measured liquor pourers.
The aim of every bar is to have a minimum mess
Zip Bartender will help you know the best measure liquor pourers available
1. Standard liquor pourers
It's a pourer used at bars and restaurants. It has a long, narrow spout with a tapered end, made of stainless steel. It also has a small tube that's connected from seal to tip, with a silicone or rubber seal. These liquor pourers are designed for the free flow of liquid from bottle to glass.
2. Measured liquor pourers
The measured liquor pourers have been designed to keep the bartenders busy work schedule in mind. This pourer dispenses the accurate amount of wine in the glass demanding lesser attention from the bartender.
One thing that separates the measured liquor pourer from the standard liquor pourer is ball bearings. There can be two to three ball bearings made of steel in a measured liquor pourer. They allow the liquor to pass through the spout and block the passage on meeting the measurement.
How to remove a liquor pourer?
It's easy to pull out liquor pourers from a standard liquor bottle. You just need to hold it tight and then move it back and forth to loosen it up.
Dealing with bottles of a size more or less than the standard size can be tedious. In your attempt to detach such a pourer, you might detach the metal part from the rubber seal. Do not panic! The minute your metal spout is removed, squeeze the rubber seal out and put the two together. Using a cloth or something dry to pull out the pourer works best because the liquor on the tip of the pourer can make your hand slippery and sticky.
You can also use a V-rod bottle opener to remove the pourer. Slide the rubber seal of the spout by the opener and make sure it's tight. Shake it up and down until the spout loosens, then pull it out.
Looking for the best automatic measure liquor pourers but can’t make up your mind!
Zip Bartender will guide you in selecting the best automatic measure liquor pourers
How should liquor pourers be cleaned?
You can go the dish cleaning way. Simply soak the pourer in water for 10-15 minutes, rinse them with cold water and towel dry them to avoid rust. Plastic pourers can be left to air dry. You can also use the brush that's usually sent with the pourer to clean it, but it can be a tedious process.
Don't do these to your bottle pourers:
- Do not soak it in soda water. It removes stickiness but does not have any antibacterial properties. This leaves your pourers unclean.
- No dishwashers. Pourers cannot stand the temperature and the cycle of a dishwasher because of their tiny size. The washer might even tear off the rubber seal.
- No hot water. The temperature of the water will ruin the metal. It can also affect the tightness of the rubber seal.
The next generation of automatic measure liquor pourers
The automatic measure liquor pourers are made with virgin plastic, a more durable material.
These alcohol pourer offers control, accuracy, and the most perfectly consistent pour speed every time. It leads to less spillage and this can save an additional two to four drinks per bottle.
It follows the standard of 1oz/30ml. The most accurate measured pour spout. These measured pourers are useful tools to portion control for profits.
It is also easy to remove and replace unlike many other pourers in the market.
2. Availability in multiple colors
To make a busy bartender's life easier it's available in different colors. The idea is to make the bar ingredients easily accessible during peak hours.
3. Easy to clean
It just needs some soap water to be washed and reused.
The new upgraded design without a collar fits on most standard liquor bottles and serves as a wine pourer and stopper.
Top ten automatic measure liquor pourers of 2022
The market is filled with automatic measure liquor pourers, but here we get you the top 10.
1. Tiger Chef Measured Liquor Pourer
This is an affordable liquor pourer and a great product for making cocktails. It is made from hard plastic and has graduated fins on its neck. Its innovative design fits almost every standard liquor bottle. It serves as a drip stopper too.
2. AmeriPour Measured Liquor Bottle Pourers
These pourers consist of three ball bearings to give out the exact amount of wine, spirits, or liquor each time. This pourer is made of virgin plastic that's durable. It is also free from cracks, leaks, and glue.
It delivers fast, consistent, accurate, and precise pour every time.
3. Linall Automatic Measure Liquor Pourers
This automatic measure liquor pourer is known to duplicate shots. This one-ounce pourer reduces spills and over-pouring. This too is made of durable virgin plastic. The no-collar design serves as a wine stopper and pourer. Its liquor spout can fit on liquor bottles with a diameter of about 15 to 20 mm keeping the
Main Content of the bottle intact.
4. Miranor Measured Liquor Pourer
Miranor is specifically manufactured to pour spirits, wine, and alcohol only. So, it keeps the drinks consistent and is easy to install. The spouts are made up of durable virgin food-grade plastic. It fits on standard 750 ml liquor and wine bottles.
5. Winco Measured Liquor Pourers
This hard plastic pourer has graduated fins on its neck to prevent leakage. It also fits all standard liquor bottles just like a Bar Pos.
Winco is a one-and-a-half-ounce pourer that's fool-proof and user-friendly. It allows you to pour measured content quickly.
6. Precision Pour Measured Pourers
Precision Pour heavy cork spouts are designed to fit oversized bottle openings. These spouts are similar to other spouts with just an extra-large fin on their stems. These can fit on 1.75-liter bottles.
7. Tezzorio Measured Liquor Bottle Pourers
This yellowtail and black collar measured liquor bottle pourer is a durable rust-free pourer. This 1.5-ounce pourer is made of virgin plastic.
It's made for standard 750 ml bottles and will not fit large-mouth bottles. It has two ball bearings to deliver a controlled pour.
8. Keklle Automatic Measure Liquor Pourers
Keklle regulates the amount of content being dispensed, leading to lesser wastage at the bar and in return saving your Liquor Cost . It can fit on a bottle with an opening of about 20 mm. But it's not a durable item and can break easily.
9. Bottles up Measured Liquor Bottle Pourers
Bottles up are manufactured from space-age plastics. The material prevents these pourers from wear and tear and corrosion. It comes with a flexible cork and fins that fit well with no chance of a leak. They work best with 375 ml bottles.
10. Bartender Gear Automatic Measure Liquor Pourers
These liquor pourers are made up of high-quality plastic. They come with an extra bottle collar to fit around bottle openings. This helps decrease your Liquor Inventory cost due to unwanted liquor spill.
The list was first uploaded on Authentic Pick.